Auto Parts-Rectifier <em>BXH11301</em> For Alternator

Diodes: 6-35 Ampere

Diameter OD: 111mm

With M5×40mm Mounting Post

With M5×20mm Mounting Bolt

With Trio

OEM NO：JA789IR ALT4269

CARGO：135680

YUNYI:12514700/HI1124F

REC HI11124+REG (12-0031) 28V 11516100/HI113ZT12835F

product details

description

The main goal of choosing a rectifier bridge is to make sure that its technical characteristics closely align with those of the generator, especially with regard to maximum reverse voltage, rated voltage, and rated current. Only when these parameters completely satisfy or surpass the generator's requirements is the rectifier bridge deemed technically practical. In addition to these requirements, the rectifier bridge's physical attributes—such as its packaging, pin arrangement, and thermal design—are very important and need to match the generator's installation and operating conditions.Additionally, the rectifier bridge's design should guarantee a smooth integration into the generator's electrical system, preventing further difficulties brought on by space constraints or installation issues. To guarantee the rectifier bridge's dependability and efficiency in real-world applications, these parameters must be carefully taken into account.

The BXH series rectifier bridges are designed for HITACHI generators and are divided into sintered and press-fit types based on our rectifier bridge technology. The sintered models, used in Isuzu and Komatsu series, feature an iron heat sink heat sink. While these two models look similar, they differ in outer diameter. The press-fit models are predominantly used in Nissan series, with insulation material separating the positive and negative heat sinks. These press-fit rectifiers are characterized by a lower overall height. The rectifier bridge structure includes an upper and lower heat sink heat sink configuration. The BXH series utilizes a standardized design and interface, making it compact, lightweight, and easy to install. It features a three-layer structure consisting of a bracket, positive heat sink, and negative heat sink. The negative heat sink has a smaller area and is designed to conform closely to the rear cover, which aids in heat dissipation. This design ensures efficient thermal management and convenient installation for customers.